Graco Reactors

Reactor A-25

For spraying foam insulation – applies up to 25 lb (11.4 kg) per minute

The Reactor A-25 is a Graco-engineered spray foam proportioner that gives you the reliability you expect on the jobsite. It maintains consistent temperature control, even when you’re spraying at maximum flow rates – resulting in better quality foam.

RELATED LINKS:

• Graco Fast-Set Plural-Component Brochure
• Reactor A25, Operation
• Reactor A25, Parts

FEATURES:

• Maintains temperature setpoints for better yield
• Maintains consistent output pressure for uniform spray pattern
• Easy to operate and maintain
• Best choice for affordability and durability

Reactor E-10

For smaller polyurethane foam or polyurea projects or touch-ups – applies up to 12 lb (5.4 kg) per minute

Graco’s Reactor E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. With smart controls that are easy to setup and simple to operate, the E-10 is a natural complement to any proportioning equipment line-up.

RELATED LINKS:

• Reactor E10, Parts

FEATURES:

• Small size is ideal for on-site portability and hard-to-reach areas
• One-person operation saves time and money
• Use as an add-on to your existing spray business
• Versatile – switch from cold spray to hot spray to foam
• Saves 30% on material costs compared to disposable foam systems
• Electric power is low draw and plugs into standard outlets
• Intuitive start, stop and digital temperature display with single knob operation
• Pressure balance valves give you quick and easy balancing of system pressures
• Balanced proportioning eliminates pressure fluctuations to give you a consistent spray pattern
• Easy-to-service fluid section reduces maintenance and increases productivity
• Electric motor improves performance and reduces operating costs
• Self-contained translucent material tanks show you that you are spraying on-ratio
• Heaters and hose give you up to 2000 watts to pre-heat circulating material

Reactor E-20 and E-30

For medium- to high-output foam insulation applications – applies up to 30 lb (13.6 kg) per minute

Equipped with material data and system diagnostics, the Reactor E-20 and E-30 proportioners provide total control for spraying foam insulation. Advanced features provide longer equipment life, more uptime for your spray day, and the overall Graco reliability and durability you’ve come to expect.

RELATED LINKS:

• Reactor E20/E30, Operation
• Reactor E20/E30, Parts

FEATURES:

• Powerful hybrid heaters for better temperature control
• Circulation valves with longer-lasting seals
• Longer-lasting modular heater control boards that minimize downtime
• Hose heat transformer that doesn’t require tap settings
• Easy to maneuver
• Quick knockdown lower pumps for easy maintenance
• Digital heat and pressure controls

Reactor E-XP1 and E-XP2

For polyurea coatings – applies up to 2 gal (7.6 liters) per minute

Graco Reactor E-XP1 and E-XP2 proportioners are engineered to process and spray polyurea and other coatings that require high pressures. The hybrid heaters and heated hose condition the materials to the right viscosity prior to mixing. Quick knockdown lower pumps for easy maintenance, easy-to-use controls, and rugged, portable design make the Reactor the preferred choice for coatings applications.

Count on Graco Reactor E-Series proportioners for power, performance and productivity on fast-curing polyurea coatings. And get the job done faster and more reliably than ever before.

RELATED LINKS:

• Reactor EXP-1/EXP-2, Operations
• Reactor EXP-1/EXP-2, Parts

FEATURES:

• Powerful hybrid heater provides up to 15,300 watts of heat to pre-heat material quickly
• Digital heat and pressure controls
• Easy to use
• Quick knockdown lower pumps for easy maintenance
• Rugged and portable
• Circulation valves with long-lasting seals
• Hose heat transformer that doesn’t require tap settings

Reactor H-25, H-40 and H-50

For high-output foam applications and roofing projects – applies up to 52 lb (23.6 kg) per minute

From residential foam insulation projects to high-volume commercial roofing jobs, Graco’s line of Reactor Hydraulic Foam Proportioners provides the reliability and power to get the job done.

Reactor H-25 Entry-level, yet powerful.
Max output: 22 lb (10 kg) per min.

Reactor H-40 More output for high-volume applications.
Max output: 45 lb (20 kg) per min.

Reactor H-50 Graco’s most powerful foam proportioner.
Max output: 52 lb (23.6 kg) per min.

RELATED LINKS:

• Hydraulic Reactors, Operation
• Hydraulic Reactors, Repair

FEATURES:

• Digital heat and pressure controls – let you program temperatures and pressures, and monitor machine performance
• Horizontal positive displacement pumps – easy to service and provide smoother changeover for maintaining best spray pattern
• Powerful hybrid heaters – heat material quickly and maintain temperature set points, even when spraying at maximum flow rates

Reactor H-XP2 and H-XP3

For coatings that require high-pressures – applies up to 2.8 gal (10.6 liters) per minute

Designed for applying polyurea and other coatings that require high pressures, the Reactor H-XP2 and H-XP3 provide superior power and performance for high-output applications. Hybrid heaters heat material quickly and maintain temperature set points, even when you’re spraying at maximum flow rates.

With the Reactor H-Series for coatings, you add productivity to your workday and boost your bottom line as well.

RELATED LINKS:

• Hydraulic Reactors, Operation
• Hydraulic Reactors, Repair

FEATURES:

• Digital heat and pressure controls – let you program temperatures and pressures, and monitor machine performance
• Horizontal positive displacement pumps – easy to service and provide smoother changeover for maintaining best spray pattern
• Powerful hybrid heaters – heat material quickly and maintain temperature set points, even when spraying at maximum flow rates

Reactor Heated Hoses

Manufactured by Graco, Reactor Heated Hoses offer features that help maintain proper fluid temperatures while you’re spraying – resulting in better yield and performance. Available in low-pressure (2000 psi / 138 bar) and high-pressure (3500 psi / 241 bar). Count on genuine Graco parts for best performance.

RELATED LINKS:

• Reactor Heated Hoses, Parts

FEATURES:

• Copper-heated hoses are designed specifically for use with Graco proportioners
• Covered with proprietary butyl cover for protection against moisture sensitive isocyanate
• Hoses are covered with foam insulation for heat retention
• Different fitting sizes on the isocyanate and resin hoses prevent accidentally connecting the wrong hoses together
• Hoses use custom designed splice kit to electrically connect hoses without having to run copper under the fittings
• Helix-design whip hose uses braided copper wires for added flexibility and longer life